Full Manual – Learning
JOHN DEERE 450C LC EXCAVATOR
OPERATION & MAINTENANCE
450CLC Excavator, Safety, Safety and Operator Conveniences, Safety and Operator Convenience Features, General Precautions, Recognize Safety Information, Follow Safety Instructions, Operate Only If Qualified, Wear Protective Equipment, Avoid Unauthorized Machine Modifications, Add Cab Guarding for Special Uses, Inspect Machine, Stay Clear of Moving Parts, Avoid High-Pressure Fluids, Avoid High-Pressure Oils, Beware of Exhaust Fumes, Prevent Fires Prevent Battery Explosions, Handle Chemical Products Safely, Dispose of Waste Properly, Prepare for Emergencies, Operating Precautions, Use Steps and Handholds Correctly, Start Only From Operator\\’s Seat, Use and Maintain Seat Belt, Prevent Unintended Machine Movement, Avoid Work Site Hazards, Keep Riders Off Machine, Avoid Back over Accidents, Avoid Machine Tip Over, Use Special Care When Lifting Objects, Add and Operate Attachments Safely, Maintenance Precautions, Park and Prepare for Service Safely, Service Cooling System Safely, Remove Paint Before Welding or Heating, Make Welding Repairs Safely, Drive Metal Pins Safely, Safety Signs, Safety Signs, Operator’s Station, Pedals, Levers, And Panels, Monitor Panel, Front Switch Panel, Front Switch Panel Functions, Rear Switch Panel, Horn, Power Boost Switch, Pilot Shutoff Lever, Travel Alarm and Travel Alarm Cancel Switch, Cab Heater and Air Conditioner, Monitor Display Diagnostic Function, Operating the Am/, Secondary Exit Tool, Opening Upper Front (Secondary Exit), Opening Side Windows, Adjusting the Seat, Adjusting Console Height, Operating the Machine, Before Starting Work, Operator\\’s Daily Machine Check, Starting Engine, Cold Weather Warm-Up, Using Booster Batteries, Travel Pedals and Levers, Control Lever Pattern Operation, Driving Up a Steep or Slippery Slope, Lifting, Lower Boom with Engine Stopped, Parking the Machine, Prepare Machine for Loading on a Trailer, Weights, Counterweight Removal, Counterweight Removal, Track Gauge Transport Position Adjustment, Loading Machine on a Trailer, Track Gauge Work Position Adjustment, Towing Machine, Lifting the Machine, Machine, Diesel Engine Oil, Diesel Engine Oil and Filter Service Intervals, Cylinder Liners, Drain Intervals for Diesel Engine Coolant, Supplemental Coolant Additives, Operating in Warm Temperature Climates, Additional Information About Diesel, Engine Coolants and John Deere, Coolant Extender, Testing Diesel Engine Coolant, Alternative and Synthetic Lubricants, Engine Break, Hydraulic Oil, Swing Gearbox and Travel Gearbox Oils, Track Adjuster, Working Tool Pivot, Swing Bearing, And Swing Bearing, Gear Grease, Periodic Maintenance, Service Machine at Specified Intervals, Check the Hour Meter Regularly, Prepare Machine for Maintenance, Fuel Tank, Hydraulic Breaker and Crusher Attachments, Maintenance and Repair Record, Keeping System, Periodic Maintenance Record Keeping, As Required, Clean Fuel Tank Inlet Screen, Drain Fuel Tank Sump, Clean Air Cleaner Dust Unloader Valve, Clean Radiator Air Inlet Screen, Drain Primary Fuel Filter, Bleed Fuel System, Check and Adjust Track Sag, Check Windshield Washer Fluid Level, Check Coolant, Every 10 Hours or Daily, Check Engine Oil Level, Hydraulic Oil Level, Every 50 Hours, Grease Working Tool Pivots, Initial Service – 250 Hours, Change Engine Break-In Oil and Replace Filter, Every 250 Hours, Check Swing Gearbox Oil Level, Travel Gearbox Oil Level, Replace Dusty Primary Element, Battery Electrolyte Level and Terminals, Radiator Coolant Level, Hydraulic Tank Sump, Engine Oil Sample, Every 500 Hours, Swing Bearing Gear, Air Intake Hose, Engine Oil and Replace Filter, Primary Fuel Filter, Pump Case Drain …
- Pages: 182
- Size: 3.52 MB
- Format: PDF (Adobe Reader)
View Manual
MANUAL – JOHN DEERE HYDRAULIC EXCAVATOR – OPERATION – MAINTENANCE – PRECAUTIONS – OPERATING PRECAUTIONS – SAFETY SIGNS – OPERATORS STATION – MACHINE – PERIODIC MAINTENANCE – MISCELLANEOUS – OPERATIONAL CHECKOUT – ASSEMBLY – STORAGE – SPECIFICATIONS – TROUBLESHOOTING